This listing is for a 1987 1988 1989 1990 1991 1992 1993 Jeep Wrangler Crown Automotive Differential Drive Shaft Pinion Yoke. The part is new aftermarket replaces OEM part number J8131656. Please read the information below and if you have any additional questions, please message us.
Fits Jeep:
-
Jeep Wrangler (YJ) (1987-1993) w/ Dana 30 Front Axle; without Slinger.
-
Jeep Cherokee (XJ) (1984-1987) w/ Dana 30 Front Axle; without Slinger.
-
Jeep Cherokee (XJ) (1986-1992) w/ Dana 44 Rear Axle; w/ Standard Differential.
-
Jeep Cherokee (XJ) (1986-1990) w/ Dana 44 Rear Axle; w/ Trac-Lok Differential.
-
Jeep Comanche (MJ) (1984-1987) w/ Dana 30 Front Axle; without Slinger.
-
Jeep Comanche (MJ) (1986-1992) w/ Dana 44 Rear Axle; w/ Standard Differential.
-
Jeep Comanche (MJ) (1986-1990) w/ Dana 44 Rear Axle; w/ Trac-Lok Differential.
Fits Vintage Jeep:
-
Jeep CJ-5 (1981-1983) w/ Dana 30 Front Axle.
-
Jeep CJ-7 (1981-1986) w/ Dana 30 Front Axle.
-
Jeep CJ-8 (1981-1986) w/ Dana 30 Front Axle.
-
Jeep CJ-5 (1969-1975) w/ Dana 44 Rear Axle.
-
Jeep CJ-6 (1969-1975) w/ Dana 44 Rear Axle.
-
Jeep CJ-7 (1986) w/ Dana 44 Rear Axle.
-
Jeep CJ-8 (1986) w/ Dana 44 Rear Axle.
-
Jeep CJ-5 (1980-1983) w/ Dana 300 Transfer Case; Front or Rear Output.
-
Jeep CJ-7 (1980-1986) w/ Dana 300 Transfer Case; Front or Rear Output.
-
Jeep CJ-8 (1981-1986) w/ Dana 300 Transfer Case; Front or Rear Output.
-
Jeep C101 Commando (1966-1971) w/ Dana 44 Rear Axle.
-
Jeep C104 Commando (1972-1973) w/ Dana 44 Rear Axle.
-
Jeep SJ & J-Series (1971-1991) w/ Dana 44 Rear Axle.
-
Jeep SJ (1980-1986) w/ Dana 44 Front Axle; without Slinger.
-
- Uses Strap & Bolt; No Slinger; Uses a Spicer 1310 Series (3.219″ Wide) Universal Joint.
